Triton Isis Bedienungsanleitung PDF herunterladen (Seite 97)

June 2004 Isis® Sonar User's Manual, Volume1

• Sweep: Forward

• Contrast: 0

• Repeat Ln: 1

• Shades: 64

• Width:

2048

2. Make any other selections at the EPC 1086 plotter suitable for

your plot session. You might want to save your sets of values as

a configuration set, using the plotter’s arrow keys to bring the

Save As Config_

x and Save Settings Config_x choices into

view of the status window (where

x is an integer), and pressing

Save on the plotter.

3. Run Isis, play back some data

4. Pause the waterfall by choosing File→Pause or by pressing

SPACEBAR.

5. On the Isis toolbar, click the printer icon to display the Plotter

Setup dialog box.

6. Choose EPC 1086.

7. In the Plotter Setup dialog box, make any other selections you

will be using for the 1086 plotter, such as the number of

channels to print, the paper width for each channel, and degree

of darkness.

8. Click the Status On radio button box if you want to monitor

plotter statistics in the session.

9. Click Plot Screen Now or click OK.

The system displays an EPC 1086 Setup Note dialog box to

remind you of the settings necessary for successfully plotting

with this plotter.

10. Click OK to acknowledge the Setup Note dialog box. Plotting

begins.

To print continuous waterfall images from Isis 2.11 or later

Plotting a continuous waterfall is exactly the same as plotting a

single screen except:

1. Set the Contrast at the plotter to a value of 15.

2. Do not pause the waterfall before plotting. (Plotting continues

until you close the Isis data file or exit Isis.)

Chapter 5: Printing in Isis

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 309 310

Keine Kommentare

Triton Isis Bedienungsanleitung Seite 97